德国LR-CAL数字测试压力表 德国LR-CAL进口压力校准器 德国LR-CAL校准测试泵
1.德国LR-CAL数字测试压力表LDM 70
德国LR-CAL原装进口数字测试压力表, 型号:LDM 70-E25, LDM70-K50
Digital Test Pressure Gauge LDM 70-E25: Accuracy ±0,125% FS
Digital Test Pressure Gauge LDM 70-K50: Accuracy ±0.25% FS
Technical Data:
• Battery powered, rugged, rotatable housing (DS 70 mm)
• 4.5-digit LC display (digit height 11 mm)
• 6-digit addi
onal display to show the selected pressure unit (height 7.5 mm)
• Pressure unit switchable (psi-bar/mbar-mWS-inHg-cmHg/mmHg-kPa/MPa)
• Easy configura
on via three push bu[1] ons
• Ingress protec
on IP 65
• Ranges from 0/1.45 psi to 0/8,700 psi (0/100 mbar to 0/600 bar)
• MIN and MAX value storage
2.供应压力表 批发德国LR-CAL数字参考压力表DFP
德国LR-CAL原装进口数字参考压力表, 型号:Model DFP
Digital Reference Pressure Indicator DFP
Scalable conversion to Force (to, kg, daN, KN)
Perfect for checking pressure gauges at hydraulic presses
Technical Data:
1. Linearity and Hysteresis: #±0.1% v.E.
2. Reading per sec. (0 filter) 10 (100 ms)
3. Temperatures: Reference: +23°C, Ambient 0...+50°C, Storage -10...+60°C
4. Temperature Effect (1°C): on Zero #±0.002%; on Sensitivity #±0.002%
5. Programmable Functions: Zero: 50%, digital Filter: 0...99%
6. Display Resolution: 1, 2, 5 or 10 Digits
7. Pressure Unit: bar, Force Units: kg, t, daN, KN (scalable)
8. Baud Rate RS232-Interface (Option): 19200, 9600, 4800
9. Peak-Function: Positive (+) and Negative (-)
10. Display: LCD, height 16 mm
11. Power Supply: 4 Alkaline Batteries 1,5 V (size AA)
12. Mechanical Limit Values
(referred to nominal pressure):
13. Service Pressure: 100% FS; High Dynamic Pressure: 75% FS
14. Permissible Pressure: max. 150% FS; Breaking Pressure:: >300% FS
15. Standard Process Coupling: 1/2" BSP male
16. Recommended Gasket: USIT A 63-18
17. Tightening Torque: 28 Nm (Tightening Wrench: 27 mm)
18. Housing: Material: Aluminum, Dimensions: appr. 132 x 80 x 48 mm
19. Protection: IP 40 RS232-Interface (optional) 9-pole D-SUB (female)
3. PC4压力校准器 德国LR-CAL进口压力校准器快递供货
德国LR-CAL原装进口压力校准器, 型号:PC4
The PC4 is an appliance for verification and calibration of pressure sensors, pressure gauges, as well as pressure switches for low pressures
Technical Data:
1. Measurement principle: Inductive
2. Medium: non-aggressive gases
3. Wetted parts: Ni, Al, CuBe, PU
4. Linearity: 0.2% FS
5. Hysteresis: 0.1% max. FS
6. Long term stability ±0.5% per year (typical)
7. Sensor volume: appr. 3 ml
8. Volume increase: appr. 0,2 ml at nominal pressure
9. Pump: Displacement volume variable
10. Bellows (fine adjustm.): Displacement volume appr. 25 cm³ at 20 crankshaft rotations
11. Power supply: 9 V E-Block (Option: plug-inpower supply 230 VAC 50/60 Hz)
12. Current consumption: appr. 10 mA
13. Protection: 250 mAT
14. Supply influence: < 0,05%
15. Option: Analogue output 0...1 V (max. load resistance $2 KOhm)
16. Display: LCD 3 1/2 digits (12.5 mm); Option: LCD 4 1/2 digits (12.5 mm)
17. Response time: Adjustable 0.3 / 1 / 2 Seconds
18. Pressure connections: Diameter 6.6 mm x 1 mm (for flexible hose with 6 mm diam.)
19. Electrical connections: Power supply jack plugs for optional plug-in power supply
4 mm banana plugs for optional analogue output
20. Temperature influence Zeropoint ±0.03% FS / K; Span ±0.03% FS / K
21. Temperature ranges: specified range from +10°C to +40°C
22. Humidity: up to 80% relative humidity
23. Storage temperature: -10°C to +70°C
24. Housing: Bench housing in Aluminium 248 mm x 225 mm x 90 mm
25. Shock resistance: 1 g
26. Housing colour: Grey, Front green anodized
27. Protection class: III
28. Degree of protection: IP 30
29. Standardisation: EN 50081-1; EN 50081-2; EN 50082-1; EN 50082-2; EN 61010
30. Weight: appr. 2 kg
4. 代理校准测试泵 德国LR-CAL校准测试泵LPP 60T
德国LR-CAL原装进口校准测试泵, 型号:LPP 60T
Calibration Test Pump LPP 60-T, pneumatic operated to generate pressure up to +60 bar / +870 PSI switchable to generate vacuum up to -0.95 bar / -28 inHg
Specification:
1. Pressuregeneration: 0...60 bar = 0...870 PSI(or equivalent), switchable to
2. Vacuumgeneration: 0...!0,95 bar = 0...-28 inHG (or equivalent)
3. Pressure ports: 1/2" BSP female rotating (with seal) for reference instrumenton the top of the pump
(Type LPP-60-T-N14: 1/4" NPT female, type LPP-60-T-G14: 1/4" BSP female rotating)
1/4" BSP female for unit under test (at connection tube)
(Type LPP-60-T-N14: 1/4" NPT female)
4. Volume per stroke: appr. 11 cm³
5. Materials: anodized aluminum, brass, ABS
6. Fine adjustment: Fine adjustment valve
7. Dimension: appr. 150 x 300 x 215 mm
8. Weight: appr. 2.55 kg
5. 德国压力比较泵 LC-AR压力比较泵报价/图片/资料
德国LR-CAL原装进口压力比较泵,型号:LSP 1000-EB-VP, LSP 1000-EB-VP,LSP 1600-DL-VP
Pressure Comparison Pump Serie LSP
Pressure Comparison Pump, hydraulic 1000 / 1200 / 1600 bar - 14500 / 17400 / 23200 ps
• Pressure source for calibra[1]on purposes
• Spindle pump and priming pump
Opera[1]ng fluid:
to 1,600 bar: Hydraulic fluids based on
mineral oil
to 1,000 bar: Water (clean, free of acid)