PTL Flexibility Test Machine

PTL Flexibility Test Machine
for checking the mechanical durability of flexible cords and cables by
bending them back and forth.
Standard outfit:
carrier, with recirculating-ball
bearing bushes running be-
low the table-board on two
cylindrical guide ways, with
mounted travelling boom,
geared motor with chain and
connecting rod to drive the
carrier with a speed
0.33 m/s ± 5%,
supports for the side pulleys,
with grooves for the adjust-
ment of the pulleys,
set of bolts nuts and ball
bearings for fastening the
pulleys, see F 43/4,
set of loading weights, de-
tails see F 43/3,
set of restraining clamps as
stops to limit the travel of the
sample,
set of terminals for connec-
tion of the samples,
base, with one front and two side doors, with splited table-board, with shelf for accessories,
protecting hood with panes of polycarbonate glass, disburdened by gas springs, with elec-
tric drive to open and to close,
door contact switches for the side doors and for the protecting hood,
electrical current load unit, details see F 43/3,
electrical switching and control unit with main switch, lockable EMERGENCY STOP switch,
preset counter as well as push buttons I and O.
Design:
Steel construction, papyrus-white structure varnished with stone grey highlights, smaller parts
black-oxide-finished, cylindrical guide ways hardened and ground, for operation at 3 x 400 V 50
Hz or 60 Hz,
Article No.: F 43.11

专线联系方式：

香港奥德赛创科技有限公司

深圳市奥德赛创精密仪器有限公司

宋先生

FAX: +86(755)26978981

Mobile: +86—15013712638

E-mail: scl@hkauto.com.cn

www.hkautosz.com

上一篇：进口冲击锤德国PTL弹簧冲击锤F22.50 F22.20
下一篇：第十九届中国国际质量控制与测试工业设备展览会

产品目录