产品名称:PTL滚筒跌落试验机 产品型号:F06.50 产品品牌:德国PTL
生产厂家:德国PTL公司成立于1946年,有着50多年的实验检测设备的生产经验,是国际IEC电工委员会的实验室检测设备指定厂家。德国PTL公司的产品有:灼热丝、漏电起痕试验仪、耐划痕测试仪、多档可调的弹簧冲击锤,试验指、针、销、球压试验装置、滚筒跌落、IP1/8的防水试验设备和防尘试验设备等。
产品概述: 符合:IEC884-1、GB2099.1、VDE0620、BS1363,本机测试插头线在经过一定次数自由跌落后的**与可靠度。试法是把插头含后端电源线 100mm 处剪断,作为试件,投入滚桶内,依试件重量设定标准所要求之跌落次数,使试件连续落下撞击,到达设定次数后,本机自动停机,然后取出试件检查受损程度。 产品参数: 滚动速度:5r.p.m ( 即每分钟跌落 10 次 ) 计数器:电子式,6 位数,到达设定次数自动停机 电源:AC230V / 50Hz PTL Tumbling Barrel Test Machine 50 to determine the mechanical strength of electrical appliances or electrical components according to IEC 60068-2-31 :2008-05 § 5.3.2, § 5.3.3 and An. A, Fig. A.1. Standard Outfit: barrel, consisting of a bearing-mounted middle segment, 2 intermediate segments of 250 mm height, and 2 bottom segments, internal length of the chute 275 mm, internal width of the chute 275 mm, bottoms made of 19 mm thick wood, with removable steel sheets of 3 mm thickness, including a charging door, internal height 1 175 mm, height of fall 1 000 mm, by removing the intermediate segments convertible to internal height 675 mm and height of fall 500 mm, frame with barrel support, drive unit with AC geared motor, to drive the barrel at 5 rpm, with slip friction clutch as protection in case of accidental contact, switching and monitoring unit with fuses, protecting switch for the motor, preset able counter to indicate the number of falls and to switch off the unit. Design: steel construction, varnished papyrus-white structured, barrel corpus of stainless steel sheet, varnished stone-grey structured, some steel parts black- oxide-finished, for connection to 230 V AC, 50 Hz, other voltages on request, Article No.: F 06.50 Alternatively: PTL Tumbling Barrel Test Machine 15 Similar to F 06.50 however with one segment barrel of internal height 675 mm and height of fall 500 mm, Article No.: F 06.15 Special model: PTL Tumbling Barrel Test Machine 30 to determine the mechanical strength of accessories for vacuum cleaners, according to IEC 60312, similar to F 06.15 however of larger dimensions, total height of the barrel approx. 1 070 mm, height of fall 800 mm。 香港奥德赛创科技有限公司
深圳市奥德赛创精密仪器有限公司
FAX: +86(755)26978981
Mobile: +86—18028748540
E-mail: scl@hkauto.com.cn
www.hkautosz.com
深圳市奥德赛创精密仪器有限公司 联系人:牛八先生 手 机:13798428887
地 址:深圳市宝安区沙井镇南环路华丰高新产业园11号电梯4楼
公司网址:http://www.hkautosz.com
联系人:牛八先生
手 机:13798428887